Importance of the Birmingham Water Pumps In Vehicles

There are a lot of important points have to be kept in the mind while choosing a high performance water pumps for vehicles.
Bookmark and Share
London, HI (prHWY.com) March 13, 2013 - Birmingham Water Pumps are also centrifugal pumps, because they use an impeller to aid in circulating the water from the bottom of the radiator into the engine. Their momentum is derived from a pulley, which is engine driven. Their construction is simple, with housings most often made of cast iron or aluminum, and a shaft that is supported by sealed ball bearings. The spring-loaded seal helps to prevent leaks. Standard water pump failure is common and is usually indicated by the noisy operations of the seals and bearing, or by a coolant leakage. Replacing and upgrading the water pump is the only solution and should be handled immediately. When doing so, consider using an aluminum water pump. The weight reduction can be as much as 5 pounds. High-performance water pumps are a perfect solution for cooling a high-horsepower car. Because they can move more water at a higher pressure, they help reduce cavitations and hot spots.

Most of this is due to the impeller design and improved passageways. The faster those larger volumes of water can flow through the system, the more heat that can be absorbed and dissipated. The most efficient water pumps can keep the horsepower loss to a minimum utilizing only 2 to 3 horsepower to flow a few hundred gallons of water each minute. Their internal designs, additional blades, and bearing structures require less in the way of horsepower to operate, and those with cast aluminum housings provide better support for the bearings halting unstable movement. Stock pumps can easily use between 15 and 20 percent of all generated horsepower just to keep the system cool. A high- performance water pump is a great enhancement to cooling and dependability.

When choosing high-performance, look for one that maintains factory-Ford cooling specs and birmingham water pumps offers a horsepower gain a lightweight, aluminum, mechanical water pump for the performance- minded. These pumps provide a weight reduction of up to 50 percent over the cast iron pumps. With a premium bearing and seal, exclusive six-blade stamped steel anticavitation impeller, and a heavy-duty 8-inch shaft, they can handle twice the load as original stock pumps while using less horsepower to pump more coolant. When changing a water pump, the cooling system must be drained. Disconnect and remove the radiator and fan shroud. Loosen the alternator adjusting bolt to remove the drive belt. Mustangs equipped with air conditioning may need to have the alternator and mounting bracket removed, too. The fan and pulley also need to be removed. Once that is complete, the bolts and washers that hold on the water pump can be loosened. Because the bolts are different lengths, mark them for reapplication.

###

Tag Words: birmingham water pumps
Categories: Apparel

Press Release Contact
B & D Electric Motor Co.
2320 4th Ave. S.
Birmingham, AL 35233

Link To This Press Release:

URL HTML Code
Create Press Release
Press Release Options
About This Press Release
If you have any questions about this press release, please contact the listed publisher. Please do not contact prHWY as we cannot help you with your inquiry.